Installation
EPOS Installation | Support By Wire (NERA only)
In certain instances the EPOS charging station might need to be installed in an area which there is limited or no view of the sky (satellites). Note: EPOS™ Support by Wire is available for Automower® NERA robotic lawn mowers equipped with EPOS™ ...
EPOS - How to Map Using a Game Controller
If you have used the App to Map Work Areas, you might have experienced how difficult it is the drive EPOS (especially in a straight line). The use of a Game Controller to drive (drop points etc.) can be very helpful and save a lot of time. The ...
EPOS - How to Map Work Areas within another Work Area
This example shows a Golf Course that needs to have smaller work areas cut at a different height that the main work area.
Can I save my Maps/Mapping Information?
All mapping information is saved on the EPOS unit itself. This information can only be saved and restored by a Certified Husqvarna Dealer using the Autocheck software. Maps can be restored to the original unit or another unit (example: a replacement)
How to guide EPOS through a narrow opening
If you have a narrow opening you need to get through, EPOS will not get through most times (sometimes it will find its way through after a couple of attempts at varying offsets). But most times it will stop with the Error “Destination unreachable”. ...
EPOS Re-installing the Charging Station
You may need to re-install the charging station for the following reasons: You have moved/repositioned the charging station EPOS is having difficulty docking with the charging station Please follow the below instructions: Open the AMC App Click on ...
EPOS maximum distance from the Reference Station
The maximum distance between the reference station and the product is 500 m / 1640 ft (about 0.3 of a mile). This is the maximum with a clear line of sight between EPOS and Reference Station Objects between the reference station and EPOS decreases ...
How to adjust the distance EPOS backs off the Charging Station
To change the distance backing off the base you need to reinstall the charging station. Open the AMC App Click on the "Map" icon Pull up the "Map objects" list Select "Charging station" Click on the "Reinstall" It should then give you the option to ...
How to reinstall the Charging Station
If you need to reposition the EPOS charging station or EPOS cannot find the charging station, please reinstall the charging station: Open the AMC App Click on the "Map" icon Pull up the "Map objects" list Select "Charging station" Click on the ...
How do I add a Repeater Reference Station?
If you need to increase the effective range of your EPOS or help eliminate "poor positioning" areas, you can add additional Reference Stations to the existing installation and use them a Repeaters. You will need to set the new Reference Station as a ...
What’s the minimum width that EPOS can pass through?
The official recommended minimum width to pass from one Work Area to another is 6 feet, but there have been many successful installations with a narrower width. When EPOS is crossing between areas “straight” (no angle) 48 inches would be the minimum ...
EPOS Installation | Using Multiple Reference Stations
Overlapping installations with reference stations is problematic. With the default setting, the correction data signal from 2 or more reference stations can disturb each other Error message: RS communication problem To mitigate this issue, there is a ...
How to add EPOS to Home Automation (Google Home)
EPOS along with most Husqvarna Automower® can be made part of your smart home with Amazon Alexa and Google Home. How to setup and use with Google Home First you need to open the Google Home App then go to: Devices/Add/Set up a New Device then search ...
How to add EPOS to Home Automation (Google Home)
EPOS along with most Husqvarna Automower® can be made part of your smart home with Amazon Alexa and Google Home. How to setup and use with Google Home First you need to open the Google Home App then go to: Devices/Add/Set up a New Device then search ...
How to add EPOS to Home Automation (Alexa)
EPOS along with most Husqvarna Automower® can be made part of your smart home with Amazon Alexa and Google Home. How to setup and use with Amazon Alexa First you need to open the Amazon Alexa App then add the “Automower” skill (search skills for ...
Can I edit or split and area boundary?
You can edit a boundary by deleting or moving "Waypoints". To split a boundary you would have to delete all the relevant waypoints then add a new "Work Area". Note: If you have many Waypoints its quite often easier to just delete the Work Area and ...
EPOS Reference Station – Maximum distance from power outlet
You can connect up to 5 x 20m Low Voltage cables giving a maximum of 100m distance from power source.
EPOS getting “Mower Disconnected” message when Mapping
The "Mower Disconnected" is not usually a GPS issue, but rather it could be losing Bluetooth connection. You need to be within Bluetooth range of your mower when creating or editing a Map. Could you also check the "Messages" on the App to confirm: ...
EPOS Reference Station – Maximum distance from power outlet
You can connect up to 5 x 20m Low Voltage cables giving a maximum of 100m distance from power source.