Yarbo Controller Connected but will not Drive/Respond
Issue:
Controller stopped allowing control Yarbo. It still connects to Yarbo as controller
light going solid and Yarbo indicating by voice that the controller connected.
When you hold the select button however nothing happens and all buttons vibrate
when pressed.
Solution:
On the Controller try the following
- Adjust the Driving Direction: Press the Right Bumper (RB) button. Then, push the left joystick or right stick to drive Yarbo.
- Adjust the Speed: Press and hold the Right Bumper (RB) button. Then, press the Left Joystick or Right Joystick vertically down to adjust the moving
Related Articles
How to Use the Remote Controller?
How to Connect Yarbo Physical Controller Ensure that Yarbo is powered on. Please make sure that the green light on the Yarbo is solid on, indicating that Yarbo is powered on and ready for the controller setup. Press and hold the Yarbo Logo button to ...Charging Instructions for Yarbo
Charging Yarbo with the Wired Charger Before charging Yarbo, check the voltage switch on the wired charger and set it to your home's AC voltage. Connect the wired charger to an electrical outlet and the charging port under the rear cover of Yarbo. ...Yarbo Snow Blower S1 Limitations
Thank you for choosing our Snow Blower S1 device! While our product offers advanced features and capabilities, it is important to be aware of its limitations to ensure safety and efficiency of use. This instruction manual outlines the functionalities ...Yarbo Tool
Yarbo Tool is available to help with diagnosing and fixing connectivity issues, troubleshooting, and checking/updating firmware. You can download the software here: Video: How to Use the Yarbo Fix Tool? The Yarbo Tool should be used in the following ...Cleaning Yarbo
Clean Yarbo regularly How to clean: DO NOT use solvents on plastic components, as commercial solvents can potentially harm the appearance and integrity of your Yarbo. USE a clean and gentle cloth or a brush to remove debris, mud and other particles. ...