Mower
Here are some tips for storing an EPOS mower for winter:
Fully charge
battery
Before bringing in the Automower from the lawn and before disconnecting
the charging station, make sure that the battery is fully charged. Once
the battery is fully charged turn the off the main power switch.
Clean the mower
Brush or wipe off any lose dirt or debris on the top and bottom of the
Automower. Next, wipe off the the bottom of the chassis using a rag and water/cleaning
solution.
Remove the top cover/shell and clean it along with the upper chassis’
Note: The cover sits on 4 joysticks) and
can be removed with short sharp tug on each corner (be careful of connected
wires)
When replacing make sure the cover is connected correctly to joysticks, once in
place push down firmly on all 4 corners
Check wheels and blades
Replace if needed
How to store
Husqvarna recommends that you store your Automower with all 4 wheels sitting flat on a surface or hanging on a Husqvarna Automower wall hanger.
Temperature range
It is also recommended that the Automower be stored in an area that is dry, above freezing and less than 95 degrees to help protect the electronic components and battery.
Reference Station
(EPOS only)
Here are some tips for storing an EPOS reference station for
winter:
Keep it outside
If the reference station is used in a Boundary wire-free installation, it
can remain outside all year.
Keep the power
supply connected
If the reference station remains outside during winter, it's recommended
to keep the power supply connected.
Install the arm
If the reference station is stored indoors, it's recommended to keep the
arm installed at the post or wall. This makes it easier to reinstall after
storage.
Temperature
range
The reference station can be stored in temperatures ranging from -20°C to
70°C (-4°F to 158°F).
Detach from
bracket
If you need to remove the reference station for service or long-term
storage, you can detach it from its bracket.