Wi-Fi Network Connection Guide for Yarbo Device
Step 1: Connect to Yarbo Device Hotspot
- Open your mobile device and ensure that the Wi-Fi feature is enabled.
- Access the Wi-Fi settings on your mobile device.
- In the Wi-Fi network list, locate and select the Yarbo device you want to operate, typically identified by the SN number ending in Yarbo. The default hotspot name should be something like "Yarbo_rover_XXXX".
- For the initial connection, enter the default password (87654321).
- Wait for your mobile device to successfully connect to the Yarbo device hotspot.
Step 2: Configure Yarbo Device and Connect to Wi-Fi Network
- Open the Yarbo APP, choose the desired Yarbo device, click on the settings option, and then click on "Wi-Fi" to enter the device Wi-Fi configuration page.
2. In the Yarbo APP, select the Wi-Fi network you wish to connect to and enter the password.
3. Ensure the entered Wi-Fi password is accurate, then click the confirm button.
4. The Yarbo device will attempt to connect to the specified Wi-Fi network; please wait for the device to connect successfully.
Step 3: Reconnect Mobile Device to Regular Wi-Fi Network
1. Return to the Wi-Fi settings page on your mobile device.
2. From the Wi-Fi network list, choose the regular Wi-Fi network to which you want to reconnect.
3. Enter the password for the Wi-Fi network.
4. Wait for your mobile device to successfully reconnect to the regular Wi-Fi network.
Step 4: Operate the Device via Yarbo APP
1. In the Yarbo APP, verify that the Yarbo device has successfully connected to the Wi-Fi network.
2. Explore the APP features and select the desired operation.
Related Articles
Wi-Fi Network Connection Guide for Yarbo Base
Step 1: Connect to Yarbo Base Hotspot 1. Open your mobile device and ensure that the Wi-Fi feature is enabled. 2. Access the Wi-Fi settings on your mobile device. 3. In the Wi-Fi network list, locate and select the Yarbo Base you want to operate. The ...How to Fix Wi-Fi Channel Issue?
Please kindly refer to the content below for your reference if the Yarbo rover cannot be detected on your mobile device due to the Wi-Fi channel issue. Switch the Wi-Fi Channel with Yarbo Tool Step 1: Download and install the latest version of the ...Modes of Network Configuration
Hotspot Mode Tips: For optimal mapping performance, we recommend utilizing Hotspot Mode to ensure a prompt response without any delays. When operating in Hotspot Mode, please ensure you stay within a 10ft range of Yarbo. Upon completing the mapping ...Yarbo Tool
Yarbo Tool is available to help with diagnosing and fixing connectivity issues, troubleshooting, and checking/updating firmware. You can download the software here: Video: How to Use the Yarbo Fix Tool? The Yarbo Tool should be used in the following ...Rover Hotspot is Not Detected on Mobile Device
Please refer to this article for assistance in case your Rover Hotspot not being detected on your mobile device, there are steps you can take to troubleshoot and resolve the issue. This guide will walk you through the process, and you can use the ...