Wi-Fi Network Connection Guide for Yarbo Base

Wi-Fi Network Connection Guide for Yarbo Base

Step 1: Connect to Yarbo Base Hotspot

1. Open your mobile device and ensure that the Wi-Fi feature is enabled.
2. Access the Wi-Fi settings on your mobile device.
3. In the Wi-Fi network list, locate and select the Yarbo Base you want to operate. The default hotspot name should be something like "Yarbo_base_XXXXXX". 
4. For the initial connection, enter the default password (87654321).
5. Wait for your mobile device to successfully connect to the Yarbo Base hotspot.

Step 2: Configure Yarbo Base and Connect to Wi-Fi Network

1. Open the Yarbo app, select the desired Yarbo device, and click on the settings option. Scroll down and click on "Network" in the RTK Base Station section to access the device's Wi-Fi configuration page.
2. In the Yarbo APP, select the Wi-Fi network you wish to connect to and enter the password.
3. Ensure the entered Wi-Fi password is accurate, then click the confirm button.
4. The Yarbo Base will attempt to connect to the specified Wi-Fi network. Please wait for a successful connection, which may take approximately 1-2 minutes. If needed, you should manually click the refresh button during this waiting period. 




    • Related Articles

    • Wi-Fi Network Connection Guide for Yarbo Device

      Step 1: Connect to Yarbo Device Hotspot Open your mobile device and ensure that the Wi-Fi feature is enabled. Access the Wi-Fi settings on your mobile device. In the Wi-Fi network list, locate and select the Yarbo device you want to operate, ...
    • Modes of Network Configuration

      Hotspot Mode Tips: For optimal mapping performance, we recommend utilizing Hotspot Mode to ensure a prompt response without any delays. When operating in Hotspot Mode, please ensure you stay within a 10ft range of Yarbo. Upon completing the mapping ...
    • RTK Base - Detailed Overview

      What is the RTK Base? RTK, or Real-Time Kinematicis a method that boosts the precision of GNSS (Global Navigation Satellite System) signals like GPS, Glonass, Galileo, and BeiDou. The main purpose of the base station is to remain fixed in one ...
    • Is there a reason to use Wi-Fi instead of 4G?

      Please refer to the information below if you are curious about why we are recommending you use Wi-Fi to instead of 4G. What is the Wi-Fi Network mode? Wi-Fi mode refers to the connection method through WiFi, which enables Yarbo to connect directly to ...
    • Yarbo Network Status Readings

      Network: - MQTT: This stands for Message Queuing Telemetry Transport. It's a network protocol often used in the Internet of Things (IoT) for device-to-device communication. It works on top of TCP/IP and is designed for situations where a small code ...