Where to best place/position for the charging station?
The ideal placement for the charging station is in a shady spot on flat ground in the middle of the lawn and with some free space around it.
Please see below for some general recommendations. For details specific to your model, please see the operator’s manual.
- Keep a minimum 3 m/10 ft of free space in front of the charging station.
- Keep a minimum of 150 cm/60 inches of free space to the right and left of the centre of the charging station.
- Keep a minimum of 60 cm/2 ft of free space behind the charging station.
- Place the charging station near a power outlet.
- Place the charging station on a level surface.
- The baseplate of the charging station must not be bent.
- Place the charging station in an area that is protected from sunlight.
- If the charging station is installed on an island, ensure that the guide wire is connected to the island.
- If the work area has two parts separated with a steep slope, we recommend putting the charging station in the lower section.
- Do not permanently secure the charging station until you have installed all the wires and verified that your installation works.
- For Automower® models that communicate with the Husqvarna Cloud only using Wi-Fi, the charging station must be located in an area with Wi-Fi coverage. If the charging station is placed in an area with a weak or no Wi-Fi signal, the robotic lawn mower will not be able to download any updates. If so, you need to contact a dealer to update the mower.
Related Articles
No Loop Signal – Blue LED/Charging Station Indicator Lamp
What color is the Charging Station indicator lamp? The charging station LED is Solid Blue: Does the length of the boundary wire exceed 800 meters? A solid blue light on the charging station indicates a weak boundary wire signal. This is normally ...
Where should I position the docking/charging station?
Before installing the docking station, it is important to make the necessary preparations: Concrete & Brick Ground Grass Ground Impact Drill + Expansion Bolts Steel Nails or Grass Pegs Next, to ensure optimal functioning of your Yarbo, follow these ...
Yarbo Charging Failure at the Docking Station?
Docking station has no power, the LED indicator is not illuminated If the Docking Station appears to be without power – indicated by the absence of illumination from the LED indicator – ensure that the Docking Station is properly connected to its ...
No Loop Signal – Green LED/Charging Station Indicator Lamp
What color is the Charging Station indicator lamp? The charging station LED is Flashing Green: Procedures: Disconnect and reconnect charging station power supply. Note: ECO-mode is disabled when the power is disconnected. If you wish to enable ...
Mower cannot make it back to charging station (battery empty)
Models 430/450 Issue: Mower not finding its way back to the charging station so stops in yard with “Empty Battery” error message. Possible causes: Finding charging station by “Guide” is disabled “Guide wire” is not set correctly Procedures: Make sure ...