Where should I position the docking/charging station?
Before installing the docking station, it is important to make the necessary preparations:
| Concrete & Brick Ground | Grass Ground |
| Impact Drill + Expansion Bolts | Steel Nails or Grass Pegs |
Next, to ensure optimal functioning of your Yarbo, follow these steps to determine the best location for your Docking Station (Do not rush through the first two steps!):
- Begin by navigating Yarbo through potential locations where you'd like to install the Docking Station.
- As you move Yarbo around, check the RTK signal strength on your APP. Try to select a position where the signal is displayed as "STRONG". This placement is most likely to ensure smooth operation.
- Rearranging the chosen location is equally crucial. It's important to ensure a clear space of at least 7 ft around the Docking Station. This spacious setup will help to prevent any signal interference.
- Be mindful of potential obstructions in this area. If Yarbo can't navigate back to the Docking Station due to blockages, it may not function properly.
This step-by-step guide is crucial for setting up your Docking Station in a location that will offer the strongest signal and cause least signal interference for your Yarbo.
Lastly, please ensure the docking station is stably installed on a flat and elevated surface using suitable instruments. This will prevent any slips while Yarbo is in the charging process.
Related Articles
No Loop Signal – Blue LED/Charging Station Indicator Lamp
What color is the Charging Station indicator lamp? The charging station LED is Solid Blue: Does the length of the boundary wire exceed 800 meters? A solid blue light on the charging station indicates a weak boundary wire signal. This is normally ...Yarbo Charging Failure at the Docking Station?
Docking station has no power, the LED indicator is not illuminated If the Docking Station appears to be without power – indicated by the absence of illumination from the LED indicator – ensure that the Docking Station is properly connected to its ...Can I move the Luba Charging Station?
If you move the Charging Station or Luba is having difficulty docking, you need to "Relocate the Luba Charging Station": Open Mammotion App Click on "Settings" Icon Click on "Relocate the Luba Charging Station" Note: Luba must be on the Charging ...Where to best place/position for the charging station?
The ideal placement for the charging station is in a shady spot on flat ground in the middle of the lawn and with some free space around it. Please see below for some general recommendations. For details specific to your model, please see the ...Docking Station must be installed on a Flat Even Surface
Living in a region characterized by undulating terrain can pose significant challenges when trying to establish a stable, level surface for Yarbo's docking station. This is critical because a docking station that isn’t on even ground could lead to ...