RTK Base Flashes Green Light All the Time?

RTK Base Flashes Green Light All the Time?


If the LED on your Yarbo Base is flashing green, it may indeed indicate an issue with the Wi-Fi connection. The LED light will change to solid green once the RTK Base is connected to the Wi-Fi network. Please follow the steps below to connect your RTK Base to the Wi-Fi network:

Step 1: Connect to Yarbo Base Hotspot
  1. Open your mobile device and ensure that the Wi-Fi feature is enabled.
  2. Access the Wi-Fi settings on your mobile device.
  3. In the Wi-Fi network list, locate and select the Yarbo Base you want to operate. The default hotspot name should be something like "Yarbo_base_XXXXXX". 
  4. For the initial connection, enter the default password (87654321).
  5. Wait for your mobile device to successfully connect to the Yarbo Base hotspot.
Step 2: Configure Yarbo Base and Connect to Wi-Fi Network
  1. Open the Yarbo app, select the desired Yarbo device, and click on the settings option. Scroll down and click on "Network" in the RTK Base Station section to access the device's Wi-Fi configuration page.
  2. In the Yarbo APP, select the Wi-Fi network you wish to connect to and enter the password.
  3. Ensure the entered Wi-Fi password is accurate, then click the confirm button.
  4. The Yarbo Base will attempt to connect to the specified Wi-Fi network. Please wait for a successful connection, which may take approximately 1-2 minutes. If needed, you should manually click the refresh button during this waiting period. 


If you encounter difficulties connecting the RTK Base to the Wi-Fi network using your mobile device, consider using the Yarbo Tool for further troubleshooting. Please follow the steps below:
Step 1: Download and Install Yarbo Tool, ensure you have the latest version of the Yarbo Tool installed on your laptop.
Step 2: Connect your laptop's WiFi to the Yarbo base's hotspot, named something like "Yarbo_base_XXXXXX.” The initial connection password is set to "87654321."

Step 3: Open the Yarbo Tool application on your laptop and navigate to the "WiFi Connection" in the Base section.
Step 4: Click on "Get WiFi Status" to verify a successful connection to Yarbo base's hotspot. The WiFi Current Status should display as "Connected."


Step 5: Click "Refresh List" and be patient as the list loads. This may take a moment.


Step 6: Choose the desired WiFi SSID from the drop-down menu, enter the correct WiFi password, and then click "Connect."


Step 7: Once again, click on "Get WiFi Status" to confirm a successful connection to the Yarbo base's hotspot via WiFi. The WiFi Current Status should now show as "Connected."


You can download the software here:

If the issue persists, please contact technical support. 


    • Related Articles

    • RTK Base - Detailed Overview

      What is the RTK Base? RTK, or Real-Time Kinematicis a method that boosts the precision of GNSS (Global Navigation Satellite System) signals like GPS, Glonass, Galileo, and BeiDou. The main purpose of the base station is to remain fixed in one ...

    • Robot will not turn on/No light on base station

      Issue: Robot will not turn on/No light on base station Model/s: All Models Possible causes: ● Robot not turned on ● Bad power outlet or power cable not connected correctly ● Bad charge station board Diagnostic steps: ● Confirm Robot is turned on ● ...

    • Does the RTK Antenna Or LoRa Antenna Require a "Line of sight" to Yarbo?

      No, they don't Understanding the logic behind the RTK System and the rover enables you to answer this question. Yarbo doesn't rely on direct visibility of the RTK System(RTK Antenna, LoRa Antenna and RTK Base). However, installing the RTK Antennas ...

    • No Loop Signal – Blue LED/Charging Station Indicator Lamp

      What color is the Charging Station indicator lamp? The charging station LED is Solid Blue: Does the length of the boundary wire exceed 800 meters? A solid blue light on the charging station indicates a weak boundary wire signal. This is normally ...

    • Wi-Fi Network Connection Guide for Yarbo Base

      Step 1: Connect to Yarbo Base Hotspot 1. Open your mobile device and ensure that the Wi-Fi feature is enabled. 2. Access the Wi-Fi settings on your mobile device. 3. In the Wi-Fi network list, locate and select the Yarbo Base you want to operate. The ...