Robot Time is Incorrect

Robot Time is Incorrect

If your Robot or App is showing the wrong time, follow below instructions to change:
  1. Make sure robot is turned on and unlocked.
  2. Go To: Menu then press OK
  3. Go To: Settings then press OK
  4. Go To: General then press OK
  5. Go To: Time & Day then press OK
  6. Go To: Set time - then press OK
  7. Enter correct Time then press OK and go back to main menu


    • Related Articles

    • Robot not mowing all Areas

      Possible causes: Not enough time scheduled.“ Lawn coverage” not setup correctly Guide wires not setup correctly Diagnostic steps: Check Schedule Check to make sure “Lawn Coverage” is setup correctly: Check each area distance Check each area % of ...

    • Robot will not start mowing

      Possible causes: Robot not turned on Bad power outlet or power cable not connected correctly Bad charging station board Mower was previously mowing in a secondary area Override the schedule is set Diagnostic steps: Confirm Robot is turned on Confirm ...

    • Robot Messages - Error/Fault

      The list below shows a number of fault messages that may be shown in the App. Message Cause Action Wheel motor blocked Grass or other objects is wound around the drive wheel. Examine the drive wheel and remove the grass or other object. Cutting ...

    • Robot Messages - Information

      The list below shows a number of messages that may be found in the Messages menu in the Automower® Connect App. Message Cause Action Low battery The product cannot find the charging station. Change the position of the guide wire. Refer to To install ...

    • Robot will not turn on/No light on base station

      Issue: Robot will not turn on/No light on base station Model/s: All Models Possible causes: ● Robot not turned on ● Bad power outlet or power cable not connected correctly ● Bad charge station board Diagnostic steps: ● Confirm Robot is turned on ● ...