Keep Yarbo at its Best Performance

Keep Yarbo at its Best Performance

Before and after every operation, DO:

  1. Check the status of the discharge chute

Notice: 
Operating with a clogged discharged chute can significantly shorten the motor's lifespan and lead to subpar snow removal performance. 
Caution:
  • SHUT DOWN Yarbo before cleaning a clogged discharge chute.
  • NEVER use your hand to clean the chute. USE the tool provided in the package.
  • KEEP HANDS AWAY from the auger and impeller, as they might harm your safety no matter if they are running or not.

  1. Remove accumulated snow from Yarbo's surface. 

  • For your safety, remember to wear gloves.

  1. Inspect the auger, housing, impeller and shear pin. 

  • If any shear pins are broken or if the scraper bar and skid shoe show signs of excessive wear, replace them with new parts.
  • Additional shear pins, scraper bars, and skid shoes can be ordered from authorized Yarbo dealers.

    • Related Articles

    • Keep Battery Pack Healthy

      DO NOT leave the battery pack inactive for more than 3 months. Leaving the battery pack inactive for an extended period will significantly reduce its performance and cause fast degradation. DO charge the battery pack for 15 minutes at least once per ...

    • Keep Firmware Up-To-Date

      Keep Firmware Up-To-Date New firmware versions will always provide better product capabilities. The new versions will be released regularly on our App, and your firmware will be updated automatically through Yarbo App's build-in Over-The-Air (OTA) ...

    • Cleaning Yarbo

      Clean Yarbo regularly How to clean: DO NOT use solvents on plastic components, as commercial solvents can potentially harm the appearance and integrity of your Yarbo. USE a clean and gentle cloth or a brush to remove debris, mud and other particles. ...

    • How to upgrade the firmware version of Yarbo?

      Step-by-Step Network Setup For Firmware upgrade Guide: 1. Initial Notification: Upon receiving your Yarbo, please promptly inform Yarbo staff of the Yarbo Serial Number (SN) code. This code is located on the external packaging of the universal ...

    • Charging Instructions for Yarbo

      Charging Yarbo with the Wired Charger Before charging Yarbo, check the voltage switch on the wired charger and set it to your home's AC voltage. Connect the wired charger to an electrical outlet and the charging port under the rear cover of Yarbo. ...