The auger of your Yarbo might be rusted over time due to constant contact with snow during operation.
You can easily manage these minor rusty areas with a paint pen. Here's a step-by-step guide to help you through the process:
Preparation
Prepare the tools: a paint pen, some cotton buds, 75% ALC, a clean cloth.
Protect yourself: please remember to wear protective gloves and other necessary protective gear to avoid getting hurt by the sharp parts of the machine.
Prepare your Yarbo:
Use your controller to lift the module part to its highest.
Press the Stop Button and the Power Switch to turn off your Yarbo.
Remove the battery pack.
Unscrew the 24 bolts to detach the protective fence.
Applying the Paint Pen
Dip the cotton bud into 75% alcohol and use it to clean off the rust in the affected areas.
Use clean cloth to wipe off the alcohol.
Shake the paint pen to ensure the paint is well-blended, and apply it evenly on the rusty areas.
Once you're done, please remember to reinstall the protective fence with your protective gloves.
We advise regular checks for rust on your Yarbo to ensure early maintenance and prevent any impact on its performance.
Possible causes: Not enough time scheduled.“ Lawn coverage” not setup correctly Guide wires not setup correctly Diagnostic steps: Check Schedule Check to make sure “Lawn Coverage” is setup correctly: Check each area distance Check each area % of ...
There are two ways to add more areas to an existing map. Please follow these steps for each method: Add more areas option will be shown after your working area has been drawn, the throwing direction has been selected, route mode has been set. Method ...
Using Skid Shoes is an essential step to enhancing the Snow Blower Module's performance on uneven surfaces. It makes it possible for the snow blower to move smoothly over a wide range of surfaces, such as pavements or gravel since they lift the snow ...