How to send EPOS to the maintenance point

How to send EPOS to the maintenance point

  1. Press the HOME button and it will show you the option of “Park” or “Go to Maintenance Point” (if setup)
  2. You can also select the Maintenance Point on the Map and set a schedule

    • Related Articles

    • EPOS is not docking correctly

      If EPOS is having trouble docking correctly - it tries to dock but either shifts to left or right. Error message may say "Charging station obstructed". The charging station uses a radio signal to dock once its close enough (at docking point), so ...

    • EPOS Error/Fault Messages

      The fault messages in the table below are shown in the Automower® Connect app. Message Cause Action Cutting system blocked The blade disc is blocked by grass or other objects. Examine the blade disc and remove the grass or other object. The blade ...

    • EPOS - How to Map Using a Game Controller

      If you have used the App to Map Work Areas, you might have experienced how difficult it is the drive EPOS (especially in a straight line). The use of a Game Controller to drive (drop points etc.) can be very helpful and save a lot of time. The ...

    • EPOS Owner Manuals

      EPOS 450/450H Owner Manual EPOS 450/450H Quick Guide EPOS 550 Owner Manual EPOS 550 Quick Guide EPOS 550H Owner Manual EPOS 550H Quick Guide

    • EPOS stopped with Error “No accurate position from satellites”

      If after “Searching for satellites” the status light turns off and you get “No accurate position from satellites” message on the App. Please follow the below steps to resume mowing from the stop point. Mower should pair with Bluetooth when you get ...