How to Install the Docking Station?

How to Install the Docking Station?




    • Related Articles

    • Where should I position the docking/charging station?

      Before installing the docking station, it is important to make the necessary preparations: Concrete & Brick Ground Grass Ground Impact Drill + Expansion Bolts Steel Nails or Grass Pegs Next, to ensure optimal functioning of your Yarbo, follow these ...
    • EPOS is not docking correctly

      If EPOS is having trouble docking correctly - it tries to dock but either shifts to left or right. Error message may say "Charging station obstructed". The charging station uses a radio signal to dock once its close enough (at docking point), so ...
    • Yarbo Charging Failure at the Docking Station?

      Docking station has no power, the LED indicator is not illuminated If the Docking Station appears to be without power – indicated by the absence of illumination from the LED indicator – ensure that the Docking Station is properly connected to its ...
    • Docking Station must be installed on a Flat Even Surface

      Living in a region characterized by undulating terrain can pose significant challenges when trying to establish a stable, level surface for Yarbo's docking station. This is critical because a docking station that isn’t on even ground could lead to ...
    • No Loop Signal – Blue LED/Charging Station Indicator Lamp

      What color is the Charging Station indicator lamp? The charging station LED is Solid Blue: Does the length of the boundary wire exceed 800 meters? A solid blue light on the charging station indicates a weak boundary wire signal. This is normally ...