How does the Frost Guard work?
As the grass is extra sensitive to wear when the garden is covered with frost, some Automower® models have a feature called Frost Guard. It is used to stop the mower from operating if the temperature is too low.
So, if you notice that your mower is parked in the charging station on a chilly morning even though it is scheduled to operate, it may be because of the Frost Guard.
How does the Frost Guard work?
If the temperature is 5°C/41°F or below when the mower is scheduled to start, the Frost Guard will delay starting by one hour.
When parked, the mower will continue to check the temperature every hour when it is scheduled. It will only start if or when the temperature is higher than 5°C/41°F.
The temperature is measured by a sensor located inside the chassis. The registered value may therefore differ slightly from the ambient temperature.
To enable/disable the Frost Guard
- Using the Automower® Connect app: More > Settings > Operation > Frost Guard
- Using the mower display: Settings > Installation > Frost Guard
Related Articles
What is 'Work Plan'?
A work plan is Yarbo's snow-blowing task. A work plan can include any one or multiple working areas and pathways you've previously mapped. You could select the areas you want to clear to create a work plan. This way, you could instruct Yarbo to ...
EPOS - How to Map Work Areas within another Work Area
This example shows a Golf Course that needs to have smaller work areas cut at a different height that the main work area.
How to use the 'Work Plan' feature?
1. Create a Plan You can select areas on the map that you want to clean and combine them to create a plan. You can customize multiple plans to effectively meet your snow-clearing requirements. Click on the "Map" icon located in the top right corner ...
How to Adjust Work Preference Settings?
What is work preference settings ？ The Work Preference Settings allow you to personalize and optimize the overall behavior and performance of your Yarbo according to your specific needs. These settings are designed to enhance the efficiency and ...
Where to find the 'Work Plan' feature within the APP?
1. You can click on the button at the bottom of Yarbo's homepage to quickly view and start your Work Plan. 2. To access your Work Plan, click on the "Map“ icon in the top right corner of Yarbo's homepage, then click the "Work Plan" button to view, ...