How do I create or modify a mowing schedule?

How do I create or modify a mowing schedule?

Firstly, confirm the Date and Time is correct (on Mower and App).

Use the Automower® Scheduler Tool to create the optimal mowing schedule for your lawn. Once created, follow the steps below to set your schedule.

On most Automower® models:

  1. Push STOP button
  2. Enter PIN
  3. Press MENU button
  4. Go to Schedule > Overview
  5. Use arrows and OK button to select the day
  6. Select Period
  7. Press OK
  8.  Enter time using number keypad

In Automower® Connect app:

  1. Press Mower tab at bottom of screen
  2. Select Schedule
  3. Select Edit tab at top right
  4. Select the time and days for mower to run
  5. Press Save

Note: If you set “Schedule Override” it will work outside of set times

What is Schedule Override?

When you hit start on the mower itself you can select “resume schedule” or “override for 24 hours” or “override for 3 days” the latter two make the mower ignore its schedule and just work nonstop for the specified time period.





    • Related Articles

    • How to Use Schedule Feature?

      What is a Schedule？ The schedule feature within the app allows Yarbo to establish specific time periods for automated cleaning of work areas. By creating a schedule, Yarbo seamlessly operates without the need for manual intervention, ensuring that ...

    • Robot will not start mowing

      Possible causes: Robot not turned on Bad power outlet or power cable not connected correctly Bad charging station board Mower was previously mowing in a secondary area Override the schedule is set Diagnostic steps: Confirm Robot is turned on Confirm ...

    • How to modify 'No-go Zone'?

      1. Add a No-go zone: Method 1: Add a no-go zone from the mapping process After you select the route mode, click the 'Check Mark'. Step 1: Select 'Create no-go zone' from the three other options Step 2: Click 'Start' Draw your designated no-go zone ...

    • What is Schedule Override?

      When you hit start on the mower itself you can select “resume schedule” or “override for 24 hours” or “override for 3 days” the latter two make the mower ignore its schedule and just work nonstop for the specified time period.

    • How to Create the No-go zone?

      What is No-go zone? The ”No-go zone" refers to areas within the working zone where you don't want Yarbo to enter. You need to draw it as a closed-off area. You can designate areas such as your car in the driveway, flower beds in the yard, and other ...