EPOS signal strength when mapping/how to check strength

Depending on what mobile operating system you use you can monitor the signal strength as you are mapping the yard:

iOS
You can monitor the signal strength, when the icon shows less bars the signal is weaker, when it turns yellow you are close to losing the signal. Once red you have lost the signal.

Android

• Related Articles

• EPOS getting “Mower Disconnected” message when Mapping

  The "Mower Disconnected" is not usually a GPS issue, but rather it could be losing Bluetooth connection. You need to be within Bluetooth range of your mower when creating or editing a Map. Could you also check the "Messages" on the App to confirm: ...

• EPOS Remote Troubleshooting using Autocheck

  Overview: Autocheck 3 (version 3.7 onwards) now has an option to view the following information for EPOS units, which will help pinpoint what and where errors occur. Note: This is historical data pulled from the Cloud Map details (with or without ...

• EPOS Losing Signal when close to RTK Reference Station

  There can be a small “blind spot” underneath the EPOS RTK Reference Station, so if the Reference Station is too close to the charging station it can show a lost or weak signal (yellow triangle on App). This issue will be more pronounced when the ...

• EPOS Loses Signal when close to RTK Reference Station.

  There can be a small “blind spot” underneath the EPOS RTK Reference Station, so if the Reference Station is too close to the charging station it can show a lost or weak signal (yellow triangle on App). You might need to move you charging station ...

• Can I save my Maps/Mapping Information?

  All mapping information is saved on the EPOS unit itself. This information can only be saved and restored by a Certified Husqvarna Dealer using the Autocheck software. Maps can be restored to the original unit or another unit (example: a replacement)