EPOS Installation | Using Multiple Reference Stations
- Overlapping installations with reference stations is problematic.
- With the default setting, the correction data signal from 2 or more reference stations can disturb each other Error message: RS communication problem
- To mitigate this issue, there is a setting called “Pre-amble ID” which is set from Autocheck 3
- No need to do anything on the mower, it will find any pre-amble setting.
- The Pre-amble setting will not allow for “roaming’ or multiple Reference stations per machine
- One mower can only be connected to one Reference station
Below is an example of a complex installation with multiple EPOS units and Reference stations which can cause the overlap issue:
Related Articles
EPOS maximum distance from the Reference Station
The maximum distance between the reference station and the product is 500 m / 1640 ft (about 0.3 of a mile). This is the maximum with a clear line of sight between EPOS and Reference Station Objects between the reference station and EPOS decreases ...EPOS Remote Troubleshooting using Autocheck
Overview: Autocheck 3 (version 3.7 onwards) now has an option to view the following information for EPOS units, which will help pinpoint what and where errors occur. Note: This is historical data pulled from the Cloud Map details (with or without ...How do I add a Repeater Reference Station?
If you need to increase the effective range of your EPOS or help eliminate "poor positioning" areas, you can add additional Reference Stations to the existing installation and use them a Repeaters. You will need to set the new Reference Station as a ...How can I update EPOS Reference Station Firmware?
The EPOS RTK Reference Station can only be updated by a Service Dealer (using AutoCheck via Bluetooth).EPOS Reference Station Firmware Update/How can I update my Reference Station Firmware?
The EPOS RTK Reference Station can only be updated by a Service Dealer (using AutoCheck via Bluetooth).