EPOS Installation | Support By Wire (NERA only)

In certain instances the EPOS charging station might need to be installed in an area which there is limited or no view of the sky (satellites).

Note:  EPOS™ Support by Wire is available for Automower® NERA robotic lawn mowers equipped with EPOS™ technology. If you own a 320 NERA, 430X NERA or 450X NERA from 2023 with an EPOS™ Plug-in kit

For these cases, there is now a solution using guide wires to assist guiding EPOS in and out of the charging station.

• Related Articles

• EPOS Installation | Using Multiple Reference Stations

  Overlapping installations with reference stations is problematic. With the default setting, the correction data signal from 2 or more reference stations can disturb each other Error message: RS communication problem To mitigate this issue, there is a ...

• EPOS Winter Storage Tips

  Mower Here are some tips for storing an EPOS mower for winter: Fully charge battery Before bringing in the Automower from the lawn and before disconnecting the charging station, make sure that the battery is fully charged. Once the battery is fully ...

• How to repair a perimeter wire break?

  Perimeter write is built to withstand a lot. But that doesn’t mean it’s invincible. Maybe an animal causes the problem. Or mother nature creates destructive conditions for your wire. Or maybe it just wasn’t installed correctly in the first place. ...

• EPOS Remote Troubleshooting using Autocheck

  Overview: Autocheck 3 (version 3.7 onwards) now has an option to view the following information for EPOS units, which will help pinpoint what and where errors occur. Note: This is historical data pulled from the Cloud Map details (with or without ...

• Wire Break/finding break in the loop wire.

  The fault message No loop signal is displayed when the Automower® robotic lawn mower is not able to detect the loop signal from the boundary wire. Possible causes: Actual break in the wire Bad connection at the charging station Damaged or water ...