EPOS How to Turn Off Automatic Firmware Updates
If you don't want your EPOS to check automatically for firmware updates:
- Launch AMC App
- Go to "My mowers"
- Go to "Mower details"
- Turn off “Check for firmware updates”
Related Articles
How to update EPOS firmware to allow for Pattern Cutting
If your EPOS shipped with an earlier version of the firmware you need to update to 11A or higher to be able to use Pattern Cutting. For the firmware update, you will have to wait until the FOTA notifies you that its available - it only checks about ...How can I update EPOS Reference Station Firmware?
The EPOS RTK Reference Station can only be updated by a Service Dealer (using AutoCheck via Bluetooth).EPOS Reference Station Firmware Update/How can I update my Reference Station Firmware?
The EPOS RTK Reference Station can only be updated by a Service Dealer (using AutoCheck via Bluetooth).EPOS Winter Storage Tips
Mower Here are some tips for storing an EPOS mower for winter: Fully charge battery Before bringing in the Automower from the lawn and before disconnecting the charging station, make sure that the battery is fully charged. Once the battery is fully ...How to upgrade the firmware version of Yarbo?
Step-by-Step Network Setup For Firmware upgrade Guide: 1. Initial Notification: Upon receiving your Yarbo, please promptly inform Yarbo staff of the Yarbo Serial Number (SN) code. This code is located on the external packaging of the universal ...