EPOS - How to Map Using a Game Controller

EPOS - How to Map Using a Game Controller

If you have used the App to Map Work Areas, you might have experienced how difficult it is the drive EPOS (especially in a straight line).

The use of a Game Controller to drive (drop points etc.) can be very helpful and save a lot of time.

The controllers shown below have been tested and known to work with EPOS


    • Related Articles

    • EPOS Remote Troubleshooting using Autocheck

      Overview: Autocheck 3 (version 3.7 onwards) now has an option to view the following information for EPOS units, which will help pinpoint what and where errors occur. Note: This is historical data pulled from the Cloud Map details (with or without ...

    • How to Use the Remote Controller?

      How to Connect Yarbo Physical Controller Ensure that Yarbo is powered on. Please make sure that the green light on the Yarbo is solid on, indicating that Yarbo is powered on and ready for the controller setup. Press and hold the Yarbo Logo button to ...

    • EPOS Installation | Using Multiple Reference Stations

      Overlapping installations with reference stations is problematic. With the default setting, the correction data signal from 2 or more reference stations can disturb each other Error message: RS communication problem To mitigate this issue, there is a ...

    • How to create a stay-out zone using AIM?

      Model compatibility: Automower 435x AWD Automower 535 AWD Automower 415x Directions: Using AIM Technology in your Automower® robotic lawn mower, you can create stay-out zones around areas of your lawn that you do not want the mower to enter: for ...

    • EPOS Installation | Support By Wire (NERA only)

      In certain instances the EPOS charging station might need to be installed in an area which there is limited or no view of the sky (satellites). Note: EPOS™ Support by Wire is available for Automower® NERA robotic lawn mowers equipped with EPOS™ ...