EPOS disconnected from App

EPOS disconnected from App

EPOS Mower disconnected from App / Bluetooth will not connect:

How to Add a mower to Automower® Connect (first setup or adding an additional mower):
  1. Open the Automower® Connect app and sign in.
  2. Tap More > My mowers > + (plus symbol) in the Automower® Connect app.
  3. Your mower should now appear in the list of available mowers in the Automower® Connect app. Tap to select it.
  4. Follow the instructions on the screen.
Note: You might need to restart EPOS to put into pairing mode (light on top of mower should flash purple).

If your mower was previously connected to the App, but will no longer connect, unpair the re-pair your mower:
  1. Unpair a mower from the App:
  2. Launch App then go to “My Mowers”
  3. Click on “Unpair mower”
  4. Once "unpaired" please do the following:
  5. Open the Automower® Connect app and sign in.
  6. Tap More > My mowers > + (plus symbol) in the Automower® Connect app.
  7. Your mower should now appear in the list of available mowers in the Automower® Connect app. Tap to select it.
  8. Follow the instructions on the screen.



    • Related Articles

    • Mower disconnected from App

      Mower disconnected from App / Bluetooth will not connect: How to Add a mower to Automower® Connect (first setup or adding an additional mower: 1. Open the Automower® Connect app and sign in. 2. Tap More > My mowers > + (plus symbol) in the Automower® ...

    • EPOS getting “Mower Disconnected” message when Mapping

      The "Mower Disconnected" is not usually a GPS issue, but rather it could be losing Bluetooth connection. You need to be within Bluetooth range of your mower when creating or editing a Map. Could you also check the "Messages" on the App to confirm: ...

    • Disconnected Message on Automower® Connect app

      Disconnected Error Message on AMC App Open the Automower® Connect app and sign in. Check the connectivity icons at the top right on the mower dashboard. A gray, crossed icon means that the technology is disconnected and a white or black (depending on ...

    • EPOS is not docking correctly

      If EPOS is having trouble docking correctly - it tries to dock but either shifts to left or right. Error message may say "Charging station obstructed". The charging station uses a radio signal to dock once its close enough (at docking point), so ...

    • EPOS Re-installing the Charging Station

      You may need to re-install the charging station for the following reasons: You have moved/repositioned the charging station EPOS is having difficulty docking with the charging station Please follow the below instructions: Open the AMC App Click on ...