Charging Station Troubleshooting

Charging Station Troubleshooting

The Power Supply Output is 28V DC (input 100-240V AC)

  1. Plug in the power supply into a reliable outlet.
  2. Locate the correct sockets to check voltage.
  3. Use the probes to make contact with the terminals. Be sure not to damage the terminals.
  4. Voltage output should be approximately 28VDC.
  5. A continuity test can be performed on the low voltage cable, replace it if found defective.
  6. Plug in the power supply and make sure the low voltage cable is connected at each end.
  7. Take a voltage reading at the charging plate (as shown in below image).
  8. Voltage should be approximately 28VDC.






    • Related Articles

    • No Loop Signal – Blue LED/Charging Station Indicator Lamp

      What color is the Charging Station indicator lamp? The charging station LED is Solid Blue: Does the length of the boundary wire exceed 800 meters? A solid blue light on the charging station indicates a weak boundary wire signal. This is normally ...

    • Charging Station Indicator Lights

      Light Cause Action Green solid light Good signals Usual operation of the product. Green flashing light The signals are good and ECO mode is enabled. Usual operation of the product. Refer to ECO mode in User Manual Blue flashing light The boundary ...

    • How to reinstall the Charging Station

      If you need to reposition the EPOS charging station or EPOS cannot find the charging station, please reinstall the charging station: Open the AMC App Click on the "Map" icon Pull up the "Map objects" list Select "Charging station" Click on the ...

    • Can I move the Luba Charging Station?

      If you move the Charging Station or Luba is having difficulty docking, you need to "Relocate the Luba Charging Station": Open Mammotion App Click on "Settings" Icon Click on "Relocate the Luba Charging Station" Note: Luba must be on the Charging ...

    • EPOS Re-installing the Charging Station

      You may need to re-install the charging station for the following reasons: You have moved/repositioned the charging station EPOS is having difficulty docking with the charging station Please follow the below instructions: Open the AMC App Click on ...