Charging Instructions for Yarbo

Charging Instructions for Yarbo

Charging Yarbo with the Wired Charger

  1. Before charging Yarbo, check the voltage switch on the wired charger and set it to your home's AC voltage.
  2. Connect the wired charger to an electrical outlet and the charging port under the rear cover of Yarbo.

There are a few things to keep in mind when using a wired charger to charge Yarbo.
  1. Check the cable and connectors: Inspect the charging cable for any signs of damage or fraying. A damaged cable should be replaced to ensure safe and efficient charging. Also, please ensure that the connectors are clean and free from debris or dirt, as this can affect the charging process. 
  2. Connect securely: When connecting the charger to Yarbo, please ensure a secure and snug connection. A loose connection may result in slow or interrupted charging. Double-check that the charger is firmly plugged into both Yarbo and the power source.
  3. Ensure compatibility: Please ensure that the wired charger you are using is compatible with Yarbo. Check the charger's specifications and ensure it provides the appropriate voltage and current for charging Yarbo. 

Charging Yarbo with the Docking Station

Autonomous Recharge:
Before enabling autonomous recharge, ensure the following prerequisites are met:
  • Establish the location of the docking station and generate the working area map.
  • Confirm Yarbo is positioned within the mapped area. It will autonomously return to recharge when the battery level falls below 20%.
You can also manually guide Yarbo to the docking station for recharge by:
  • Click the "Charge" button on the Yarbo app's home page.


  • Click the "Recharge" button on the Yarbo app's virtual controller page.



  • Click the "Recharge" button on Yarbo's app home page and work plan page when executing the work plan.



Manual Recharge with Physical Controller
  • Drive Yarbo onto the docking station, ensuring the Snow Blower Module faces outward (requires backward movement).
  • Upon Yarbo detecting it's centrally positioned on the docking station, automatic charging will commence.
  • Check the physical controller's LED indicator. If it shows a solid red light (indicating a battery level below 20%), charge the physical controller.


Using the Yarbo Power Station for Charging

  1. The power station is available for purchase at the following link: Yarbo Power Station. 
  2. Visit the provided link to explore and acquire this product for your convenience.




Charging Duration

The battery and remote controller feature LEDs that blink sequentially to indicate the current battery level during charging. A fully charged battery is indicated when all battery-level LEDs are turned off. 

Charging Yarbo with Wired Charger
  • 0 to 100% State of Charge (SOC): Approximately 5 hours
  • 30% to 80% SOC: Approximately 2 hours and 20 minutes

Charging Yarbo with the Docking Station
  • 0 to 100% SOC: Approximately 3 hours
  • 30% to 80% SOC: Approximately 1 hour and 15 minutes

Charging Process in Different Conditions

  • Low Temperature: If the battery's cells are below 5°C, Yarbo prioritizes heating the cells first. Once the temperature reaches 5°C, the charging process will be reflected in the app. This means if the battery has been in a cold environment for an extended period, you might not see immediate movement in the charging meter.
  • Normal Conditions: Under standard conditions, the battery charges at a rate of 600W. This ensures a steady and quick charging process.
  • Above 90% Charge: To maintain battery health, the charging speed reduces as it exceeds 90%. This gradual slowdown protects the battery's longevity.


    • Related Articles

    • No Loop Signal – Blue LED/Charging Station Indicator Lamp

      What color is the Charging Station indicator lamp? The charging station LED is Solid Blue: Does the length of the boundary wire exceed 800 meters? A solid blue light on the charging station indicates a weak boundary wire signal. This is normally ...

    • Yarbo Charging Failure at the Docking Station?

      Docking station has no power, the LED indicator is not illuminated If the Docking Station appears to be without power – indicated by the absence of illumination from the LED indicator – ensure that the Docking Station is properly connected to its ...

    • Yarbo Tool

      Yarbo Tool is available to help with diagnosing and fixing connectivity issues, troubleshooting, and checking/updating firmware. You can download the software here: Video: How to Use the Yarbo Fix Tool? The Yarbo Tool should be used in the following ...

    • Yarbo Snow Blower S1 Limitations

      Thank you for choosing our Snow Blower S1 device! While our product offers advanced features and capabilities, it is important to be aware of its limitations to ensure safety and efficiency of use. This instruction manual outlines the functionalities ...

    • EPOS Re-installing the Charging Station

      You may need to re-install the charging station for the following reasons: You have moved/repositioned the charging station EPOS is having difficulty docking with the charging station Please follow the below instructions: Open the AMC App Click on ...